Automotive Manual, Car Parts and News

2000-01 MANUAL A/C-HEATER SYSTEMS Blazer, Jimmy, Sonoma & S10 Pickup
Removal Procedure (C42)
1. Disconnect the electrical connector (3).
2. Remove the blower motor resistor mounting screws (1).
3. Remove the blower motor resistor (2) from the blower case.
Installation Procedure (C42)
1. Install the blower motor resistor (2) to the blower case.
NOTE: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
2. Install the blower motor resistor mounting screws (1).
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Connect the electrical connector (3).

Download