Automotive Manual, Car Parts and News

Schefenacker recommends that this installation be carried out by a professional installer. Please read ALL the instructions and warnings thoroughly before installing theTelescopic Trailer Tow Mirrors.These mirrors are designed only for the vehicles listed on this page. Ensure that the fitting instructions are followed exactly, as failure to do so may result in incorrect installation, and may also result in the driver, passengers and vehicle being placed in hazardous conditions.

STEP 1
Roll both front windows completely down and then disconnect the vehicles battery. Read all instructions before proceeding to STEP 2.
NOTE: If you are installing a manual mirror do not disconnect the battery.
STEP 2
Remove the screw from the sail inner trim panel, using a Phillips head screw driver.
WARNING: Do not try to remove the sail inner trim panel after you remove the screw, as it is still connected to the door trim.This panel will be removed in Step 7.
STEP 3
Remove the three screws using a Phillips head screw driver.
STEP 4
Remove the door handle by removing the Torque screw located under the handle.You will need a Torque socket size T40 to remove this screw.
STEP 5
Remove door switch module by levering it upwards with a straight head screwdriver.
STEP 6
Remove all the connectors from the back of the switch module and put the switch module aside.
STEP 7
Using two hands pull up on the door inner trim panel to remove it. WARNING: Make sure you gently remove the door lock tab, out from the door inner trim panel, before you pull the trim panel away from the door.

Download pdf