Electronic Climate Control
1. Disconnect the negative battery terminal to prevent an accidental short circuit.
2. Unscrew the shift knob counter clockwise to remove. (Figure A)
3. Unclip and remove the cup holder/parking brake cover and shifter cover as one unit. (Figure B)
4. Remove (2) Phillips screws from the bottom of the radio/climate control panel. (Figure C)
5. Open glove box, squeeze sides together and let open fully then remove (1) 10 MM bolt from the side of the radio bracket.
6. Unsnap and remove radio/climate control panel including climate control vents at the top.
7. Remove (4) Phillips screws securing vents to radio/climate control panel to remove.
8. Remove (8) Phillips screws securing the electronic climate control to the radio/climate control panel to remove.
9. Remove (4) Phillips screws securing the radio display harness bracket to the radio chassis then unclip and remove the radio display harness.
Manual Climate Control
1. Disconnect the negative battery terminal to prevent an accidental short circuit.
2. Unscrew the shift knob counter clockwise to remove.
3. Unclip and remove the cup holder/parking brake cover and shifter cover as one unit.
4. Remove (2) Phillips screws from the bottom of the radio/climate control panel.
5. Pull the climate control knobs off and remove (2) Phillips screws from behind knobs.
0 comments for this entry ↓
There are no comments yet for this entry.
You must log in to post a comment.