Automotive Manual, Car Parts and News

RSS Feed

Free PDF Download, Car Parts and Automotive News

2008 Toyota Corolla Interface Kit for iPod

August 10th, 2010 · No Comments

1. Vehicle Protection (Fig. 1-1) (a) Protect fender before starting. (b) Place removed vehicle components on protective blanket. (c) Remove the negative (–) battery cable. CAUTION: Do not touch the positive terminal with any tool during removal. (d) Using the protective blanket, cover front seat, center console, interior of vehicle and front side of the shift lever.
2. Vehicle Disassembly
(a) Using a panel removal tool, remove the console side garnish LH (Fig. 2-1). (1) Disengage the three (3) claws and clip, and then remove the console side garnish LH.
(b) Using a panel removal tool, remove the console side garnish RH. (Fig. 2-2) (1) Disengage the three (3) claws and clip, and then remove the console side garnish RH.
(c) Remove the console side garnish end LH. (Fig. 2-3). (1) Apply protective tape to the area shown in the illustration. (2) Insert a panel removal tool and slide it toward the clip. (3) Pull the panel removal tool with both hands to disengage the clip as shown in the illustration. (4) Disengage the two (2) claws and clip, and remove the console side garnish end LH. (Fig. 2-4)
(d) Remove the console side garnish end RH. (Fig. 2-5) (1) Apply protective tape to the area shown in the illustration. (2) Insert a panel removal tool and slide it toward the clip. (3) Pull the panel removal tool with both hands to disengage the clip as shown in the illustration. (4) Disengage the two (2) claws and clip, and remove the console side garnish end RH. (Fig. 2-6)

Download

Related Post


Related Tags: , , , , , , , , , , , , , , , ,


0 comments for this entry ↓

  • There are no comments yet for this entry.

You must log in to post a comment.

?>