Automotive Manual, Car Parts and News

Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Loosen (2) hose clamps and remove rubber hose. (Ref. “C”)
3. Remove compression ring. (Ref. “B”)
4. Install power plate with a small amount of grease on the installing edge of the power plate for ease of installation. (Ref. “A”)
5. Locate the power plate midway of rubber hose making sure the power plate locks into the internal buldge of the formed rubber hose.
6. When installing the power plate hose assembly to intake manifold, face the power plate using Figure 1.
7. Before tightening clamps, be sure that power plate has engaged both the intake manifold and formed intake tube.
* Please Note: The outside diameters of the power plate will fit inside the diameters of the intake manifold and the formed intake tube.
The sound of power…The “whistle” means its working.

Download