Automotive Manual, Car Parts and News

PowerAid throttle Body spacer instruction for Nissan Xterra/Frontier:
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove throttle body air intake assembly.
3. Remove (4) bolts from the throttle body. (Ref. “C”)
4. Remove gasket and clean surfaces.
5. Remove bolts from the throttle linkage bracket and save.
6. Install power plate with (2) gaskets. (Ref. “A” & “B”)
A. Install one gasket between the throttle body and power plate.
B. Install second gasket between the power plate and manifold.
7. Replace (4) bolts and washers (Ref. “C”) using Step 3 as an example.
8. Install throttle linkage plate using (2) 6mm flat head screws. (Ref. “D”)
9. Reinstall the throttle linkage bracket using saved bolts. Refer to Step 5.
10. Inspect & Test the throttle linkage for full open & closed travel before driving. Some cruise or kickdown cables may require adjustment. Please refer to your vehicles service manual for proper adjusting.
11. Reinstall the throttle body air intake assembly using Step 2 as an example.
12. Reconnect battery cable.

Download