Automotive Manual, Car Parts and News

Sodium-based grease is not compatible with lithium-based grease. Read the package labels and be careful not to mix the two types. If there is any doubt as to the type of grease used, completely clean the old grease from the bearing and hub before replacing.
2WD MODELS 1. Raise and support the vehicle safely. 2. Remove [...]

[Read more →]

Instructions Procedure:
1. Remove the wheel hub (refer to the manufacturers instructions).
2. Place the bearing separator under the bearing assembly, making sure the flat side is facing up and under the bolt holes. Tighten the bearing separator by turning the nuts evenly (fig.1B).
3. Place the puller insert into the centre of the hub, see fig.1A.
4. Slide [...]

[Read more →]

Cherokee, Comanche and Wagoneer 2WD and 4WD front suspensions consist of solid axle (tubular axle on 2WD), 4 control arms, 2 coil springs and track bar. Track bar is used to minimize front axle side-to-side movement. Stabilizer bar and shock absorbers control suspension spring movement. Grand Wagoneer and Wrangler models use leaf spring front [...]

[Read more →]

Removing
Remove decorative wheel cover, for light-alloy wheels pull off protective cap (use pulling hook in vehicle tool kit). Remove bolt for driveshaft. (Only remove when vehicle is standing on its wheels: danger of accident). Remove wheel. Secure brake rotor using a wheel bolt. Remove bolt. Pull cable of ABS wheel speed sensor out of bracket [...]

[Read more →]

The Front Trailing Arm Street Spherical is designed to allow smooth motion of the front trailing arm while eliminating bushing deflection.
Removal
Using the 21mm wrench remove the nut attaching the front trailing arm, FTA, to the front strut. Using the ball joint tool remove the ball joint stud from the strut. Using the 21mm socket, ratchet, [...]

[Read more →]

Installation requires a professional mechanic. Prior to beginning, inspect the vehicles steering, driveline, and brake systems, paying close attention to the suspension link arms and bushings, anti-sway bars and bushings, tie rod ends, pitman arm, ball joints and wheel bearings. Also check the steering sector-to-frame and all suspension-to-frame attaching points for stress cracks. The overall [...]

[Read more →]

This pdf cover the procedures to set up the cell phone on Jeep Wrangler. The Jeep JK Wrangler is designed to meet all of the vehicle owner’s needs whether in town or off-roading in rugged terrain. One of the newest features available in the Jeep JK Wrangler is hands-free cell phone operation. Starting in 2007, [...]

[Read more →]

The release bearing on my BMW 328i is whining a lot but the car still drives perfectly. I have been quoted £500 for a new clutch so am planning just to keep driving it till it fails – how long do you think I’ve got? Will it get worse or will I just be stuck [...]

[Read more →]

Inside this manual you will find routine maintenance, tune-up procedures, engine repair, cooling and heating, air conditioning, fuel and exhaust, emissions control, ignition, brakes, suspension and steering, electrical systems, and wiring diagrams.
Product Features

Haynes Publications, Inc. 92035 Repair Manual
Genuine Haynes Publications, Inc. Part

[Read more →]

REAR DRUM BRAKE TYPE: ‘99-01 models 1. Raise the rear of the vehicle, and support it with safety stands in the proper locations. 2. Remove the wheel nuts (A) and rear wheel (B). 3. Press the parking brake pedal. 4. Remove the hub cap (C). 5. Raise the locking tab on the spindle nut (D), [...]

[Read more →]