Automotive Manual, Car Parts and News

Drill a 1/8″ hole under the top of the oval 1/2″ back from the front edge to feed the cable ties thru because there is not enough room for the adhesive backed swivel bases to stick to. For the center bottoms of each oval use the swivel bases with the front edge of the base 7/8″ back from the front oval face.

Attach oval grill assemblies to intakes using the Tie Wraps. You’ll want to position the grills in place and carefully pull on Ties until both top and bottom are secured snug. See video here: http://www.youtube.com/watch?v=ek_rGy-Heok which shows how the ties are fed through the grill to secure to the air intake ports.

Grill Assembly on Nissan Juke