Automotive Manual, Car Parts and News

Thank you for purchasing the Harman Motive Intake System for the Nissan R35 GTR. We know you’ll appreciate the quality and performance of this Harman Motive product. These instructions are intended as a guide to properly install your product. Please take care and take your time. Should you have any questions or comments, please don’t hesitate to contact us. We sincerely appreciate your business and support.

WARNINGS AND NOTES
1. Installing the R35 Intake System requires removal of your front bumper.
2. Make sure vehicle has been turned off for 5 minutes before starting installation.
3. It is critical to make sure ALL connections are properly fastened before starting the vehicle – otherwise a check engine light may appear.
4. You will need to jack up the front of you R35. We recommend at least 12” of ground clearance.
5. Our intake systems are designed to work without additional tuning. We have tested them with Cobb tuning without problems.
6. Take great care with your MAF sensors. They are very sensitive and are critical to the performance of your vehicle.
7. The K&N filters should be checked and cleaned/oiled every 10,000 miles or as needed.
8. Carefully label and box all removed stock components incase you need to go back to stock later.

Download