- 03-05 Dodge Ram 5.7L Hemi Air Intake System Installation Instructions 1. Disconnect the negative battery cable, and remove the factory “accordion” style intake hose by loosening the two factory clamps. 2. Loosen the two 10mm bolts securing the factory air box
- Ford Long Travel Air Bag Instructions This air bag system was designed around a stock exhaust configuration. Some aftermarket exhaust systems will require modifications to the tail pipe! • We recommend installation be done by a trained
- Nissan Maxima Wave Cushion Plate RE4F04A Installation Instructions Discard the original dish cushion plates. The original dish cushion plates may have damaged the drum about .250” from the piston top ledge area. Check and ensure that all burrs
- Porsche Boxter The new Porsche Boxter emphasis on performance is immediately evident from the front, where enlarged air intakes in a new geometric arrangement give the Boxster an even more dynamic look
- Chrysler Big Block V8 Engines Flying Magnet Crank Trigger Kit On some vehicles the MSD Crank Trigger Kit may require slight modifications to accomodate special engine plates, pulley systems, etc. INSTALLING THE PICKUP AND BRACKET 1. Mount the pickup holder onto the
- 1998-2004 Nissan Frontier Undercarriage Installation Instructions The recommended push beam height for this undercarriage assembly is 10-1/2” from the center of the push beam to level ground. DO NOT exceed 12-1/2” in height for this undercarriage. 1.
- Ford Quadra-Version Four-Wheel Drive Operating Instructions The vehicle should only be engaged in 4 Wheel Drive for off-road operation or when road or weather conditions create poor traction. When you are operating the vehicle on DRY
- 90-05 Mazda Miata Differential Mount Bushings Installation instructions It is recommended that this set be professionally installed if you are unfamiliar with this type of work, and a factory service manual be purchased prior to performing any work