- 2007-2008 Dodge Nitro 37122 Kit installation Instructions 1. Before beginning the installation, please read the instructions thoroughly and verify that the hardware kit is complete. If any of the pieces listed above are missing, call you distributor
- Mercury ABS G-Force Sensor Modules Removal Instructions Only the ABS G-Force sensor modules should be removed and collected in the Switch Out containers. ABS wheel speed sensors in wheel units do not contain mercury and should not
- Flat-Head Engine Design, 1924 When Fred Zeder, Owen Skelton and Carl Breer developed the original engine for the 1924 Chrysler, they selected a flat-head or valve-in-block design. Chrysler engineers continued to use this conservative
- 1998-2004 Ford Ranger JBA Headers Installation Instructions TO START: 1. Remove and inventory JBA exhaust 2. Disconnect negative battery cable and allow vehicle exhaust to cool. 3. With the vehicle raised and properly supported, use a 15mm socket to remove
- FORD F150, F250, F350 Body Lift Kit Installation Instructions This kit should only be installed on a vehicle that is in good working condition. Before you install the kit, thor- oughly inspect the vehicle for corrosion or deformation of
- BMW 318i Coupe The 318i is equipped with a 2 litre (not 1.8) four cylinder engine and while BMW are better known for 6 cylinder engines you would be hard pressed to notice
- 1994-2002 Dodge Ram 2500/3500 5.9L Cummins Smokers S8100409 Installation Instructions Removal of Stock System: 1. Separate the stock exhaust system at the slip joint by the muffler. Remove the rear exhaust from rubber hangers and remove the system from under the
- Electric Drum Brake Installation Position the trailer on a stable and LEVEL working surface. If possible, leave the tow vehicle hooked to the trailer in order to limit movement as well as keeping the