- 1998-2004 Ford Ranger JBA Headers Installation Instructions TO START: 1. Remove and inventory JBA exhaust 2. Disconnect negative battery cable and allow vehicle exhaust to cool. 3. With the vehicle raised and properly supported, use a 15mm socket to remove
- Fuel Cut Defender Type II Instructions Before installing the Fuel Cut Defender it is important to determine were the vehicles ECU receives its boost reference signal from the manifold absolute pressure sensor or air flow meter,
- Car2PC Car PC Digital Interface Instalation Instructions The Car2PC Interface is designed to provide seamless integration between Car PC / Laptop and car stereo. It will allow you to listen to the sound from the PC through
- BMW E36 & E46 3 Series Quick Fit Pro Harnessbelts Installation Instructions With the purchase of this SCHROTH asm harnessbelt, you have chosen a sophisticated restraint system, which represents a further advance in harness restraint technology. Extensive research, testing and field experience
- Honda Universal Adapter (Accord & Acura Series) Users Manual Specially designed adapters are used in conjunction with Universal Anchoring System (UAS) stands and Universal Measuring System (UMS) pinchweld stands when securing vehicles with horizontal pinchwelds and vertical jack tabs
- BMW E46 M3 2001- AA Short Shifter Instructions NOTE: If you have a lighted gearshift knob, do this first !!! -At the base of the gear lever is a shift boot surrounding the lower shaft. -Remove the shift boot by
- 2007.5 Dodge Ram Cummins L6-6.7L Intake kit Installation Instructions - Complete Stock Intake. - With 5/16” nut driver loosen clamps on OE tube at turbo/air box and remove. Loosen clamp at turbo and disconnect crank case line with pliers. Remove
- 2005–up Mustang Engine Start Push-Button Instruction Sheet The following information describes the installation procedure for the M-11572-GT “ENGINE START” push-button into a 2005-‘09 Mustang. STEP 1: Start by removing the (2) screws found at the rear of the center