- Mazda Miata Kenne Bell Supercharged Tech Tuning Tips The Mazda engine produces a greater percentage HP gain (+65%) from 6 psi boost than any vehicle we ever supercharged. We believe this to be the most flexible and best
- Nissan Titan Mount Kit Personal Plow Installation Instructions Read instructions before assembling. Fasteners should be finger tight until instructed to tighten according to the torque chart. Use standard methods and practices when attaching snowplow including proper personal protective
- Mazda RX7 1st Gen Rear Brake-Caliper Rebuild Getting started - Chock the other 3 wheels on both sides - Release handbrake - Put the gearbox into neutral - Loosen wheel nuts - Jack up the car - Remove wheel nuts + wheel - Place
- 04-09 Mazda 3 TR-4101P Kit Installation Instructions 1. Complete Stock intake. Please disconnect battery terminals before installation. 2. Remove plastic battery ram air. 3. Disconnect Crank case line and remove plastic fitting. Save for later install (See step 11). 4.
- e-Boost2-40psi Instructions The e-Boost2 is not waterproof and must be mounted inside the cabin. The e-Boost2 is designed to be panel mounted with the bracket supplied. Alternatively the 60mm e-Boost2 can be
- Automobile Code Scanner VW And Audi Vehicles model 96374 Operation Instructions The Code Reader is designed to work with 1990 or newer Audiо and VWо vehicles that utilize a 16 pin “OBD-II” style Data Link Connector. If the vehicle has an
- BMW E46 M3 Sport Away Bar Set INSTALLATION OF HOTCHKIS FRONT SWAY BAR 1) Drive the front of the vehicle onto floor ramps and securely block the rear wheels of the vehicle. If ramps are not available, use
- 2001-2003 Dodge Neon R/T & ACR Cold Air System Installation Instructions Removing the stock air inlet system: a) Loosen the five screws securing the stock air box lid. Remove the air box lid from the vehicle. b) Remove the Inlet Air Temperature (IAT)