- Mercedes/Audi Radio Removal Tool All instructions assume a drivers seat vantage point. Caution is advised when removing and reassembling wood or plastic parts of a dash. Applying unnecessary force or pressure may cause a
- The Toyota 3S 2-litre Guide The first Toyota 3S-FE and 3S-GE engines were released for the 1986 model year and, fittingly enough, in the nose of the ST162 Celica (which was a monumental improvement over
- Front Wheel Bearing Tool Ford Transit Model Vs1270 Instructions Instructions Procedure: 1. Remove the wheel hub (refer to the manufacturers instructions). 2. Place the bearing separator under the bearing assembly, making sure the flat side is facing up and under the
- Ford Probe & Mazda MX-3, MX-6 and 626 MSD Installation Harness Before installing the MSD Ignition and Harness disconnet the battery cables. When disconnecting the battery cables, always remove the Negative (-) cable first and install it last. This Harness is designed
- 2001-Newer Ford Excursion/99-Newer F250-F750 Super Duty FP-102 Base Instructions The FP-102 (‘01-Newer Excursion and ’99-Newer F250 - F750) is a no-holes base. Installing a no-holes base does not require drilling any holes into the vehicle. The base mounts under
- 2002-2005 Nissan Altima Exhaust System Installation This Borla Performance Cat-Back™ Exhaust System (Part number 140105) has been designed for 2002-2005 Nissan Altima equipped with a 3.5L V-6 engine and automatic or manual transmissions. Borla Performance Industries
- 4.6 4V Cam Installation and Timino Instructions PROCEDURE: • Install camshafts, matching each cam to present cams in engine. NOTE: Most cams are marked in positioning slot at rear of cam s haït Example: LE=Lefl ExhausL Follow Ford procedure for
- Ford Focus ST Front Mounted Intercooler Fitting Instructions Tools required: - Vehicle ramp or Jack and axle stands, T25 Torx driver, T30 Torx driver, 8mm spanner, 10mm socket, ratchet and extension bar, Pozzidrive screwdriver, Flat blade screwdriver, Trim