- 2003-2007 Dodge 5.9L Cummins Bank High-Ram Intake Owner's Manual 1. For ease of installation of your Banks High-Ram Intake, please familiarize yourself with the procedures by reading the entire manual before starting work. This instruction manual contains 8 pages
- Ford Focus Installation Instructions Procedure: (Approximate time to complete installation: 3 - 4 hours) A. Removing the Door Panel Coverings 1. For ease of installation, do both sides at the same time. 2. Roll the windows to
- DIF Type-DC PWM Fan Controller Operating Manual The DIF Type-DC PWM Fan Controller utilizes the latest digital control technology to provide precise and accurate temperature control by varying the duty cycle of the fan(s) from 20% to 100%
- 2008 Nissan Altima Coupe Stillen Front Lip Spoiler Installation Instructions 1. After the front lip spoiler is prepped and painted, double-sided tape should be applied to the indentation on the inside of the front spoiler. This surface has to be
- 2004-2005 Nissan Spec V Turbocharger System Installation Instructions Study these instructions completely before proceeding. Engine and/or turbocharger damage may occur if any component within these instructions is improperly installed. Turbonetics, Inc or any of its distributors cannot be
- 2002 Dodge RAM 1500 Series Rear Mud Guard Installation Instructions Install Paint Protection Film before mud guards (see other side) Please read instructions thoroughly before installation. 1. Clean and degrease the mud guard location area on the fender before installation. 2. Remove factory
- Mazda 3 Smoked Rear Reflector with LEDs Installation Instructions This installation guide specifically focuses on the hatchback version of the vehicle. Installation on the sedan will be similar. Tools required: • Socket wrench with 10mm socket and 8-inch extension • Philips-head screwdriver •
- Signalо Mirror Installation Instructions for Dodge Procedure A1 – Door Panel Removal: Dakota/Durango (See A2 for Ram Van and A3 for Ram Pickup) 1) Lower window. 2) Remove 5 screws holding door panel in place. 3) Gently raise door