- Chrysler Big Block V8 Engines Flying Magnet Crank Trigger Kit On some vehicles the MSD Crank Trigger Kit may require slight modifications to accomodate special engine plates, pulley systems, etc. INSTALLING THE PICKUP AND BRACKET 1. Mount the pickup holder onto the
- Electric Drum Brake Installation Position the trailer on a stable and LEVEL working surface. If possible, leave the tow vehicle hooked to the trailer in order to limit movement as well as keeping the
- 2002 Nissan Altima BX1829 Installation Instructions The front fascia and tie down brackets are removed for baseplate installation. Tie down brackets will not be reinstalled. No drilling necessary. The BX8869 is available for the vehicle. Attachment
- 1995-2003 Nissan Maxima Stillen Rear Sway Bar Instructions Installation: 1. Establish the vehicle on flat ground. For easier installation lift rear of vehicle onto secure jack stands. 2. Remove rear wheels for ease of installation! 3. Remove the M6 screws that
- Nissan Infiniti 1100X/F-NI Transponder Bypass Programming Instructions The 1100X/F-NI interface module is used when installing remote start products in Toyota/Lexus vehicles equipped with a factory immobilizer. The 1100X/F-NI allows for easy interfacing between the remote start and
- StealthOne Owner's Manual Since you are the proud owner of a Valentine One® radar locator you are already aware that the Valentine One® is the most advanced radar locator available. Your BMW is
- 1994-96 Mazda B Series 2WD Pickup BX2509 Installation Instructions Installation of this baseplate requires removing the bumper. 1. Read the General Instruction Sheet included with this baseplate. 2. The baseplate mounts to the vehicle using the four bolts that mount the
- 1993-97 Ford Probe GT/Mazda MX-6 GT Air Intake Kit Installation 1. Turn the ignition OFF and disconnect the vehicle's negative battery cable. 2. Disconnect the mass air sensor electrical connection. 3. Loosen the hose clamps on the intake hose at the throttle