- Alfa Romeo 156 Brake Replacement The procedure below was written up for a 1998 2.0 Twinspark with vented front discs but should be the same for all 156 models. The shape of the pads will
- Spin-On By-Pass Filter Installation and Servicing Instructions Start up procedures 1. Check that all fittings and hoses are securely attached, and that the hoses are routed properly. 2. Check engine oil level. Fill to full mark if necessary. 3. Set
- Mazda RX-8 Fund Side Strakes Installation Instructions Installation of the side strakes should taoe approximately 30 minutes per side to complete following these simple instructions. Allow yourself plenty of time. There is no need to rush and
- T55 Digital OBD2/Can Car Scanner Owner's Manual Definition: Onboard Diagnostics II - A second-generation emissions diagnostic system required on all 1996 and newer vehicles (though some 1994 and 1995 model year vehicles were equipped with early versions
- 99 Ford Super Duty Centurion Clamp Mount Installation Guide This document provides all the necessary information to allow your Whelen product to be properly and safely installed. Before beginning the installation and/or operation of your new product, the installation
- 1995-02 Dodge w/ 6' SuperRail Installation Instructions The following instruction should be followed to install the king pin Trailer Plate. FOR KING PIN BOXES WITH A FLANGE: 1. Place the Capture Plate {J2} over the king pin, with the
- 2009 BMW 320i The BMW 320i comes standard with a set of 16-inch alloy wheels, headlights that can automatically switch themselves on, and fog lights and roof rails but no roof rack (that's
- 02-05 Dodge Ram 1500 4wd ReadyLift Installation Instructions Step 1: (A) Position truck on a flat surface and lift vehicle by the frame so that the front wheels are off the ground using a floor jack and jack