- 1991-1994 Nissan 240SX Short Ram System Installation This inlet pipe kit requires the removal and reinstallation of emissions related components. If you are not familiar with the installation and/or the operation of these components then please refer
- BMW 325i XDrive The looks of the BMW 325i are backed up by its actual performance figures. The 2.5 litre engine delivers a maximum power of 160 kW at 6500 rpm and a
- 99-00 Ford F-250/F-350/F-550 Powerstroke 7.3L PowerAid Throttle Body Spacer Instructions Installation Instructions. Read Me! 1. DISCONNECT NEGATIVE (-) BATTERY CABLE. 2. Loosen (2) hose clamps and remove rubber hose. (Ref. “C”) 3. Remove compression ring. (Ref. “B”) 4. Install power plate with a small
- Instructions for the Use and Care of Your Acura Car Cover Your new cover will help minimize deterioration of the paint and upholstery of your vehicle by shielding it from the ultra-violet rays of the sun, dirt, dust, tree leaves, sap,
- 2000-2005 Mitsubishi Eclipse 2.4L Installation Instructions Sheet Installation Instructions: Disconnect the negative battery cable and then disconnect the positive battery cable. Disconnect the wiring, remove the belt, and then remove the stock alternator from it's mounting brackets.
- Nissan Maxima Wave Cushion Plate RE4F04A Installation Instructions Discard the original dish cushion plates. The original dish cushion plates may have damaged the drum about .250” from the piston top ledge area. Check and ensure that all burrs
- 08 Mazda 3 Automatic Cruise Control Installation Instructions INSTALLATION PREPARATION: 1. DISCONNECT NEGATIVE BATTERY CABLE BEFORE INSTALLATION. 2. REMOVE THE STEERING COLUMN SHROUD AND LOWER DASH PANEL. HARNESS INSTALLATION: 1. LOCATE THE WHITE CONNECTOR AT THE IGNITION SWITCH. CONNECT THE RED IGNITION
- Mazda RX-2 and 616 Workshop Manual MAZDA 616 is equipped with a four Speed manual transmission which is of The synchromesh type on the low, second, third and top gears and of the selective sliding mesh