- 2004-2005 Acura TSX Installation Manual Acura TSX Figure Grille Installation 1) Remove the OEM fog light grilles, if this item was purchased. The stock fog light opening covers are held in place with spring clips attached
- 2007.5 Dodge Ram Cummins L6-6.7L Intake kit Installation Instructions - Complete Stock Intake. - With 5/16” nut driver loosen clamps on OE tube at turbo/air box and remove. Loosen clamp at turbo and disconnect crank case line with pliers. Remove
- ALFA ROMEO 156 GTA Manual Sedan Report The Alfa Romeo brand name is one of the most emotive in the automobile world, with a sporting heritage that stretches way, way back. The subject of this test –
- 1994-1997 Nissan Maxima No Bose Radio Replacement To original Nissan radio is mounted to a center dash assembly which contains not only the radio but air conditioner controls, and two pockets below the radio. When replacing the
- 1968-1987 Ford Engines Cylinder Head Installation Instructions The Edelbrock Performer RPM Street Cylinder Head is designed for street high performance use, and is interchangeable with any 1968-87 standard (non Cobra-Jet) 429-460 Ford cylinder head. This new cylinder
- 2002-04 Nissan Altima 2.5S 4 cyl. Dyno-Proven Cold Air Intake System Installation Disconnect the negative battery terminal before starting this installation. 1. Remove the air intake duct, the air intake box and the air vacuum lines connected to the air box. Unbolt the
- Rear Stabilizer Bar Installation Instructions THIS KIT INCLUDES LOCK NUTS WHICH REQUIRE TIGHTENING WITH A WRENCH AFTER BEING STARTED BY HAND. 1. As shown in photo one (1), place D-shaped poly-bushings onto straight areas of the
- 2008 Nissan Altima Coupe Stillen Front Lip Spoiler Installation Instructions 1. After the front lip spoiler is prepped and painted, double-sided tape should be applied to the indentation on the inside of the front spoiler. This surface has to be