- 1992-97 Mazda MX-6 - Ford Probe GT Ultra S Kit Installation Instructions This Ultra S kit contains underdrive crank pulley Part# 0208106 with steel timing trigger ring and 4 mounting bolts.. Check that the part number matches the part number engraved on
- Car2PC Car PC Digital Interface Instalation Instructions The Car2PC Interface is designed to provide seamless integration between Car PC / Laptop and car stereo. It will allow you to listen to the sound from the PC through
- 94-01 Dodge Ram TireGate P/N D80014 Installation Instructions 1. Remove tailgate by disconnecting the tether cable and lifting the tailgate out at approximately a 45º angle. (Reference the truck’s Owner’s manual). 2. Carefully remove the OEM tailgate pivot cup
- 03-05 Dodge Ram 5.7L Hemi PowerAid Throttle Body Spacer Installation Instructions 1. DISCONNECT NEGATIVE (-) BATTERY CABLE. 2. Loosen the hose clamp and remove the air tube from the throttle body air box. 3. Disconnect the air temperature sensor connector attached to the
- 1987-1991 Dodge Dakota Truck 3.9L V6 Engine Shorty Header Installation Instructions These components are designed to improve the exhaust efficiency of the Dodge 3.9 Litre V6 engine with E.F.I. (Electronic Fuel Injection). These tubular manifolds are a direct replacement for the
- Dodge Ram P/N D80006 Installation Instructions 1. Remove tailgate by disconnecting the tether cable and lifting the tailgate out at approximately a 45º angle. (Reference the truck’s Owner’s manual) 2. Carefully remove the OEM tailgate pivot cups
- 03-up Dodge Ram Truck 1500 & 2500 Bumper Cover Installation Instructions BEFORE PAINTING – FIT BUMPER COVER AS FOLLOWS: 1. Remove the factory Air Dam by removing the five 10 mm hex bolts; discard the bolts and Air Dam. 2. Using the T30
- 1994-1997 Nissan Maxima No Bose Radio Replacement To original Nissan radio is mounted to a center dash assembly which contains not only the radio but air conditioner controls, and two pockets below the radio. When replacing the