1. Turn the ignition OFF and disconnect the vehicle’s negative battery cable.
2. Disconnect the mass air sensor electrical connection.
3. Loosen the hose clamps on the intake hose at the throttle body and mass air sensor.
4. Using a 10mm socket, loosen and remove the bolt that holds the vacuum switch to the airbox lid.
5. Release the […]
1993-97 Ford Probe GT/Mazda MX-6 GT Air Intake Kit Installation
November 8th, 2009 · No Comments
2003 Mitsubishi Eclipse Spyder GTS BX1964 Installation Instructions
October 1st, 2009 · No Comments
The headlight assembly, front fascia and horn bracket are removed for baseplate installation. Drilling is required. Trimming of air dam and fascia are required. The BX8869 is available for the vehicle. Attachment Tabs are 23 inches center to center and a height of 12 inches.
1. Using the 10MM socket, remove the five metric bolts from […]
1994-2001 Acura Integra TWM Performance Short Throw Shifter Installation Manual
July 12th, 2009 · No Comments
1. Unscrew the stock shift knob by rotating it counter clockwise.
2. Remove stereo face plate and lighter assembly by unclipping both clips on the back.
3. Remove all screws securing center console and remove console.
4. Remove the rubber dust boot surrounding the shifter, use caution not to damage it. Put it in a safe place for […]
Search engine terms: probe gt throttle bodies, fordprobefactoryair, air filter hose mazda mx6, 1993 mazda mx6 throttle body, 1993 mazda 6i air filter pdf, probe gt, air intake hose ford mazda, , manual motor ford probe gt, 1996 mazda mx6 factory air intake, fuse diagram 93 probe gt, how to uninstall a intake manifold on a 93 ford probe gt, how is the hoes connect to a trottle body on a ford probe, , FORD PROBE manual pdf, how to bypass the mass air flow sensor on a 93 ford probe, air intake duct ford probe, how to bypass mass air flow sensor in mx6, mass air flow upgrade mx6 97, ford probe air intake adaptor,
