Check that the bracket is in proper contact with the cylinder block boss and tighten to the specified torque in the order shown. Tightening torque: 28 ± 2 Nm (21 ± 1 ft. lbs.)
CRANKSHAFT BEARING INSTALLATION
When bearing replacement is required, select and install the correct bearing by the following procedure.
1. Measure the crankshaft journal diameter [...]
2003 Mitsubishi Eclipse V6-3.0L SOHC Crankshaft and Cylinder Block Engine Service and Repair
September 18th, 2010 · No Comments
2003 Mitsubishi Eclipse Spyder GTS BX1964 Installation Instructions
October 1st, 2009 · No Comments
The headlight assembly, front fascia and horn bracket are removed for baseplate installation. Drilling is required. Trimming of air dam and fascia are required. The BX8869 is available for the vehicle. Attachment Tabs are 23 inches center to center and a height of 12 inches.
1. Using the 10MM socket, remove the five metric bolts from [...]
