Automotive Manual, Car Parts and News

1. Disconnect the negative battery cable, and remove the factory “accordion” style intake hose by loosening the two factory clamps.
2. Loosen the two 10mm bolts securing the factory air box to the intake manifold.
3. Disconnect the air temperature sensor wire on the front of the factory air box & twist to remove the sensor from […]

[Read more →]

- Complete Stock Intake.
- With 5/16” nut driver loosen clamps on OE tube at turbo/air box and remove. Loosen clamp at turbo and disconnect crank case line with pliers. Remove tube.
- Disconnect air temp & MAF sensor. Loosen 10mm nut holding in front of air box using wrench or socket. Lift up and pull OE […]

[Read more →]

TO START:
1. Turn the ignition OFF and disconnect the vehicle’s negative battery cable.
2. Disconnect the air temp. sensor electrical connection.
3. Loosen the hose clamps at the turbo inlet and the airbox outlet as shown.
4. Remove the intake tube from the vehicle as shown.
5. Loosen and remove the 10mm nut that retains the airbox to the […]

[Read more →]

Installation:
1. This Hi-Flow system replaces the Nissan Maxima OEM air box. Briefly, the OEM air box is held in place with three bolts (lower housing), support bracket bolt (behind the mass sensor), and a hose clamp (mass sensor). The air box itself consists of two halves the upper housing which attaches to the mass sensor […]

[Read more →]

- Loosen AFM clamp (1) securing the crossover tube (4) to the AFM
- Unplug the AFM connector (2) by pushing down on the tab and pulling away. Do not pull on the wires.
- Remove the three plastic clips securing the air temp sensor wire to the air box.
- Separate the crossover tube (4) from the […]

[Read more →]