Automotive Manual, Car Parts and News

1. Start by disconnecting the wire harness from the MAF sensor as shown.
2. Next loosen the hose clamp that attaches the stock air tube to the stock air box as shown.
3. Remove the bolt that holds the stock air box in place and set aside for reuse with the MAC air system.
4. Next remove the […]

[Read more →]

As you read through this procedure, note that each part referenced has the same callout number throughout. Also, the part number in the text matches the corre- sponding part number in the art. Kit parts are prefaced by the word kit in italics.
NOTE
You will find it easier to keep track of hardware if immediately after […]

[Read more →]

Get ready to install the kit.
1. Remove the shift transfer case shift linkage.
a. If present on your vehicle, remove four bolts and skid plate from the frame under the transmission and transfer case.
b. Remove two rubber bushings and transfer case shift linkage from shift lever and transfer case.
2. Remove the front bumper.
a. Remove nine panel […]

[Read more →]

The K&N Drycharger included with this kit must be installed on the K&N air filter when used with a K&N Typhoon Cold Air Intake System. The K&N Typhoon Intake System is a performance product that can be used safely during mild weather conditions. During harsh and inclement weather conditions, you must convert your Cold Air […]

[Read more →]