Automotive Manual, Car Parts and News

STEP 1. Begin by opening the armrest door. Using the Phillips screw-driver, locate and remove two (2) Phillips screws inside and toward the back of the armrest storage compartment. Set screws aside. Just in front of the armrest locate a small plastic cap. Using the small flat screw-driver carefully pry cap loose exposing two (2) […]

[Read more →]

Only the ABS G-Force sensor modules should be removed and collected in the Switch Out containers. ABS wheel speed sensors in wheel units do not contain mercury and should not be removed. ABS G-Force sensor module removal instructions for specific vehicle types are listed below.
ABS G-Force sensor module removal procedures for specific vehicle types are […]

[Read more →]

Pre-Installation:
1. Remove all stock intercooler pipes and intercoolers (Refer to Factory Service Manual for removal instructions)
2. Install Front Mount Intercooler. (Refer to FMIC installation section)
3. Unbolt Oil Cooler and move forward at least one inch.
a. Remove upper bracket
b. Bolt lower hole to existing hole where factory intercooler was.
c. Mark hole for upper side bracket hole
d. […]

[Read more →]

This book explains the main service points regarding the transmission itself. However, please utilize the relevant service manual for the car model and year in question when concerns arise regarding onboard inspection and service.
important points
(1) Component diagrams are published at the beginning of each section so that you may more easily visualize the assembled state […]

[Read more →]