Automotive Manual, Car Parts and News

There is a lot of play in the wheel on this truck and I am wondering how to go about fixing it. The power steering pump squeels when I turn, so I am going to replace it, but I doubt that will fix the play.

[Read more →]

I have a 2003 Cadillac CTS. There is an a/c water leak underneath the center Consul. Its causing everything to get wet! I took the carpet out behind the drivers seat and water is actually pooling back there. Any ideas on how to fix this?? I found out that it isn’t the a/c drain. But [...]

[Read more →]

READ INSTRUCTIONS COMPLETELY BEFORE INSTALLING THIS BRACKETRON PHONE MOUNT. All instructions are written from the drivers seat position looking forward at the vehicle dash. We advise caution whenever your removing or handling plastic parts of a vehicles dash. WARNING: Unnecessary force or pressure can cause pieces to crack or break. Logo and part number will [...]

[Read more →]

All instructions assume a drivers seat vantage point. Caution is advised when removing and reassembling wood or plastic parts of a dash. Applying unnecessary force or pressure may cause a piece to crack or break.
Pro.Fit logo and part number will be right side up and readable when installed.
TOOLS REQUIRED: #1 Phillips screwdriver, hook tool, marking [...]

[Read more →]

What you will need for assembly:
1- socket wrench
1- 9/16 socket
1- Metric 13 socket (Prius uses metric bolts however a 9/16 works)
1- 9/16 flat wrench
1- protective eyewear
Step 1- Remove the 2 Black extendmyseat brackets from the packaging and locate the 4 black 3/8” provided bolts.
Step 2- Go to your vehicle with a socket wrench and a [...]

[Read more →]

All instructions assume a drivers seat vantage point. Caution is advised when removing and reassembling wood or plastic parts of a dash. Applying unnecessary force or pressure may cause a piece to crack or break.
TOOLS REQUIRED: 7mm socket & driver, DTRT (dash trim removal tool), 3/16″ drill bit & drill, duct tape, phillips screw driver.
PARTS [...]

[Read more →]

PLEASE READ COMPLETE INSTRUCTIONS BEFORE INSTALLING THIS Pro.Fit MOUNT. All instructions assume a drivers seat vantage point. Caution is advised when removing and reassembling wood or plastic parts of a dash. Applying unnecessary force or pressure may cause a piece to crack or break
STEP 1.
Begin by removing trim bezel that surrounds climate control. Insert hook [...]

[Read more →]

All instructions are written from the drivers seat position looking forward at the vehicle dash. We advise caution whenever your
removing or handling plastic parts of a vehicles dash.
Step. 1
Start by applying the parking brake and placing the transmission into the neutral position.
- For automatic transmissions, grasp the plastic cover below the shift knob and push [...]

[Read more →]

All instructions assume a drivers seat vantage point. Caution is advised when removing and reassembling wood or plastic parts of a dash. Applying unnecessary force or pressure may cause a piece to crack or break.
TOOLS REQUIRED: Small flat screw driver, #2 Phillips screwdriver, hook tool, 5/64” drill bit, and drill, marking pen
STEP 1.
Begin by opening [...]

[Read more →]

All instructions assume a drivers seat vantage point. Caution is advised when removing and reassembling wood or plastic parts of a dash. Applying unnecessary force or pressure may cause a piece to crack or break.
STEP 1.
Insert the two (2) radio removal tools into the slots on the face of the radio. NOTE: Make sure the [...]

[Read more →]