Automotive Manual, Car Parts and News

RSS Feed

Free PDF Download, Car Parts and Automotive News

Chevrolet C-5 Corvette Header System Installation Instructions

January 2nd, 2011 · No Comments

Stock System Removal
Under the Hood: Place the vehicle up on jack stands or a hydraulic lift to provide access to the bottom of the vehicle. For safety and to protect you car’s electrical system, remove the ground cable from the negative battery terminal.
Carefully remove the fuel rail covers, from both the top left and right [...]

[

How to remove the heads of a 2001 Chevrolet Cavalier?

January 1st, 2011 · No Comments

I have a 2.2l ohv 2001 cavalier and i am trying to take the heads off but there seems to be alot of things involved will somebody let me know the steps to removing them maybe like if you have alldata i do not have a subscription.

[

Nissan QD32 Navara Diesel Turbo Kit

December 27th, 2010 · No Comments

To suit the Nissan QD32 four cylinder engine Worldwide – Navara 3.2 litre diesel THIS TURBO SYSTEM IS DESIGNED TO INTEGRATE WITH THE STANDARD ENGINE AND IMPROVE POWER AND TORQUE BY UP TO 50% COMPLETE SYSTEM In order to provide maximum durability under heavy load conditions, this kit features :

[

Exhaust Manifold for Nissan Skyline(RB25DET) Product Features

December 26th, 2010 · No Comments

TR Skyline RB25DET exhaust manifold is high quality performance stainless steel manifold with T4 flange. It has been designed for optimum gas flow to allow faster exhaust exit, improve throttle response; therefore speeding up spool time and reducing turbo lag. TR manifold is TIG welded, outstanding polished finish tubing and huge weight reduction over stock [...]

[

Nissan Broken Exhaust Manifold Stud Service Bulletin

December 26th, 2010 · No Comments

The exhaust manifold stud has been changed for improved durability. Use the following procedure to repair vehicles which exhibit excessive exhaust noise due to exhaust manifold stud breakage.
1. Remove the exhaust manifold on the side of the engine with broken stud(s). (Figure 1) For additional information, refer to the EM Section of

[

1989 Nissan 300ZX Intake Manifold Installation

December 24th, 2010 · No Comments

Removal 1. Release fuel system pressure. Disconnect battery and drain cooling system. Disconnect vacuum and coolant lines attached to intake manifold and label accordingly. Remove throttle linkage. Remove collector cover and collector. 2. Disconnect fuel line and components that interfere with removal. Remove intake manifold bolts using removal sequence. Remove intake manifold and fuel injector [...]

[

2000 Nissan Altima SE Timing Belt Installation

December 18th, 2010 · No Comments

1. Release fuel pressure. See FUEL PRESSURE RELEASE. Drain coolant from radiator and cylinder block. Drain engine oil. Disconnect all necessary coolant hoses, electrical connectors, vacuum hoses, fuel lines and control cables.
2. Remove front exhaust pipe. Remove air injection valve pipe. Remove intake air duct. Remove radiator fan and shroud. On Frontier and Xterra, remove [...]

[

2000–2004 Toyota Tundra Flowtech Super Competition Headers

December 16th, 2010 · No Comments

This header system requires cutting and welding of the stock exhaust system
Read all instructions carefully before attempting the installation.
Thank you for making FLOWTECH HEADERS your choice in a high-performance exhaust system. Extensive dyno/track testing has enabled FLOWTECH to offer the most advanced design in headers for your application. Due to the restricted room available in [...]

[

03-05 5.7L Dodge Hemi Truck Headers

December 13th, 2010 · No Comments

Installation of headers on 2003 model year trucks require the use of Bassani “Y” pipe adapter, part number 570302. Installation on 2004 and 2005 model year trucks is accomplished with the adapters included with these headers.
Installation instructions.
1. Disconnect negative battery cable.
2. Raise and support vehicle.

[

The BEGi 1.8L Mazda Miata Exhaust Manifold

November 26th, 2010 · No Comments

Installation and operations manual Applicable to all 1994 to1997 1.8 liter mazda miata. The success of this installation will be determined by a variety of factors. These instructions should be adhered to unless reasonable cause for deviation exists. The vehicle must be in excellent condition and proper tune prior to starting the installation. Care and [...]

[