The recommended push beam height for this undercarriage assembly is 12-1/2″ from the center of the push beam to level ground. DO NOT exceed 14-1/2″ in height for this undercarriage.
WARNING: Always perform vehicle undercarriage installations with the keys removed from the vehicle’s ignition. Properly tag the ignition switch to alert others work is being performed […]
1999-2005 Ford F-250/350 Super Duty Pickup Undercarriage Installation Instructions
March 8th, 2010 · No Comments
2003-2005 Dodge RAM 2500 Pickup Undercarriage Installation Instructions
December 17th, 2009 · No Comments
1. Remove the bumper and adjustable bumper mount plates from the truck frame rail. NOTE: The fascia will need to be permanently removed or notched for reinstallation. Discard mount plate hardware.
2. Install the support arms (Ref 8 & 9) to the truck frame rail. The passenger side will install behind the front stabilizer bar and […]
2002 Nissan Altima BX1829 Installation Instructions
November 22nd, 2009 · No Comments
The front fascia and tie down brackets are removed for baseplate installation. Tie down brackets will not be reinstalled. No drilling necessary. The BX8869 is available for the vehicle. Attachment Tabs are 22 inches center to center and a height of 15 5/8 inches.
1. Remove two phillips screws from under fascia corner, just forward of […]
Search engine terms: headlights beam height from ground, 8 pin automotive connectors, fog lights diagram 99 super duty, automotive switch 3 position, what is a frame rail for a car, , , 14 pin trailer plug, writing a 7 pin trailer plug, boxing truck frame basics, dodge frame rails, ford 7 pin connector upgrade, best price for new frame rail for Ford Focus, boxing truck frame rails, car frame rails, subaru undercarriage parts, carpart/ frame rail, HEADLAMP WASHER KIT, car undercarriage parts explained, torsion height snow plow 2500,
