Automotive Manual, Car Parts and News

For easier assembly and installation, vehicle and all snowplow components should be on a smooth, level, hard surface, such as concrete.
1. Remove license plate bracket and retain for vehicle owner. Remove bumper from bumper brackets. Retain fasteners.
2. Remove bumper brackets from frame. Retain fasteners.
Diesel applications: On these applications, you must first remove the top two […]

[Read more →]

1. Remove tailgate by disconnecting the tether cable and lifting the tailgate out at approximately a 45º angle. (Reference the truck’s Owner’s manual).
2. Carefully remove the OEM tailgate pivot cup from the tailgate taking note of which side they belong on.
3. Remove latch pin bolt. A special wrench may be required.
4. Figures 1 through 5 […]

[Read more →]

Installation requires a professional mechanic. Prior to beginning, inspect the vehicles steering, driveline, and brake systems, paying close attention to the suspension link arms and bushings, stabilizer bars and bushings, tie rod ends, pitman arm, ball joints and wheel bearings. The overall vehicle must be in excellent working condition; repair or replace all worn parts. […]

[Read more →]

For easier assembly and installation, vehicle and all snowplow components should be on a smooth, level, hard surface, such as concrete.
1. Remove bumper from bumper brackets. Retain fasteners.
2. Remove bumper brackets from frame. Diesel and V10 applications: On these applications you must first remove the top two intercooler fasteners. Then push intercooler up and out […]

[Read more →]

Dodge Caliber, Jeep Compass Subwoofer Installation
1. Lift up on the B pillar post cover and then pull it towards the center of the car to remove.
2. Using a panel removal tool gently pry up the threshold/kick panel along the bottom of the front and rear door openings to release fasteners and remove panel.
3. Find the […]

[Read more →]

Tools Reqd: ratchet with 8mm and 10mm sockets (extension not required), small flat blade screwdriver, small phillips head screwdriver.
Open the hood and prop it up.
Remove the four 10mm bolts (see photo)
Remove the quick-lock fasteners holding the weather trim piece in place. They are removed using a small Phillips screwdriver.
Remove the 4 quick-lock fasteners in the […]

[Read more →]

Many people who will install these rollbars do not like to read instructions, but need some general direction on what to do. For these people, we have provided a summary of the steps (in bold) preceding the detailed instructions. We recommend setting aside some plastic bags or small containers to put fasteners and small parts […]

[Read more →]

Disassembling the Trunk Panels:
All of our connections take place in the trunk. We need to remove the drivers side carpeted panel in order to gain access to the factory amplifier, where we will tap into the factory audio system.
1. Begin by removing all items from the trunk of the vehicle. Make sure that all tail […]

[Read more →]