Automotive Manual, Car Parts and News

Prior to installation, carefully inspect the vehicle’s steering and drive train components. Be sure to check ball joints, tie rod ends, pan-rod bar, and control arm bushings. Everything must be tight and in good working condition.
• We recommend installation be done by a trained professional
• Read instructions carefully before attempting installation
• Secure and properly block […]

[Read more →]

Tools Reqd: ratchet with 8mm and 10mm sockets (extension not required), small flat blade screwdriver, small phillips head screwdriver.
Open the hood and prop it up.
Remove the four 10mm bolts (see photo)
Remove the quick-lock fasteners holding the weather trim piece in place. They are removed using a small Phillips screwdriver.
Remove the 4 quick-lock fasteners in the […]

[Read more →]

Installation of this baseplate requires removing the bumper fascia. Holes need to be drilled in the frame and
metal bumper. The air dam needs to be trimmed.
1. Starting in the front fender wells, remove the three Phillip head plastic rivets that are directly in front of the tires. Also remove the 10mm Hex head bolt inboard […]

[Read more →]

Following the installation instructions for BX1933 1977 Mitubishi Eclipse Spyder:
1. The baseplate will mount to the frames on each side of the radiator and also to the lower support frame directly below the motor. Two holes will need to be drilled on each upper frame and the two bolts to the lower frame will be […]

[Read more →]