Automotive Manual, Car Parts and News

In the vast majority of cases, the manifold may be installed without modifications, if further port matching is required, material removal should be blended up at least two inches into the runner. Since the casting lines between the runners and the plenum floor are located entirely outside of the runner entries, an ideal runner approach […]

[Read more →]

Dodge Nitro Subwoofer Installation
1. Find the fuse block under the hood and open the fuse box cover.
2. Using a 13mm socket and ratchet loosen and remove the fuse box power supply nut. Fig. 1
3. Connect the ring terminal of the power harness to the fuse box power lug and retighten the nut.
4. Route the wire […]

[Read more →]

Dodge Caliber, Jeep Compass Subwoofer Installation
1. Lift up on the B pillar post cover and then pull it towards the center of the car to remove.
2. Using a panel removal tool gently pry up the threshold/kick panel along the bottom of the front and rear door openings to release fasteners and remove panel.
3. Find the […]

[Read more →]

STEP 1. Set the emergency brake. Insert key into shift lock mechanism. With vehicle ignition off, put vehicle into gear. Remove ash tray by pressing on its face. It will pop open. Push down on lip located on top of ash tray. Ash tray will rotate out. Set aside. Next, remove the trim panel surrounding […]

[Read more →]