Automotive Manual, Car Parts and News

Tools required: - Vehicle ramp or Jack and axle stands, T25 Torx driver, T30 Torx driver, 8mm spanner, 10mm socket, ratchet and extension bar, Pozzidrive screwdriver, Flat blade screwdriver, Trim removal type tool, Protective clothing, footwear and eyewear are also recommended.
1. Raise the vehicle on a ramp or place on axle stands. Open bonnet. Remove […]

[Read more →]

Follow carefully the instructions listed on these pages and use the template provided, do not over tighten bolts. Do not use silicone on any connections, use mastic. Ensure that safe work practices are followed when installing your Airflow Snorkel. Protective ear and eye wear should be worn at all times when using power tools.

[Read more →]

Follow carefully the instructions listed on these pages and use the template provided, do not over tighten bolts. Do not use silicone on any connections. Use urethane Ensure that safe work practices are followed when installing your Airflow Snorkel. Protective ear and eye wear should be worn at all times when using power tools.

[Read more →]

These instructions are for the Audi TT and Volkswagen Mark IV chassis vehicles. The photos shown are of an Audi TT. The Volkswagen applications use the same caliper brackets, rotors and hats, and the caliper bodies are identical, so the installations are very similar on all vehicles. The one main difference is the brake lines, […]

[Read more →]

Exquisite build quality with industry leading performance distinguishes this exhaust system from all others. Our system also features complete T304 Stainless Steel construction, including the internal parts of the muffler. Installation of this exhaust can be completed on jack stands or ramps. Never work under a vehicle only supported by a jack. If you do […]

[Read more →]