The FP-102 (‘01-Newer Excursion and ’99-Newer F250 - F750) is a no-holes base. Installing a no-holes base does not require drilling any holes into the vehicle. The base mounts under the seat bracket and is compressed to the floor using the seat bolts. Note: For extra stability, the use of a Brace 2 or Brace […]
2001-Newer Ford Excursion/99-Newer F250-F750 Super Duty FP-102 Base Instructions
March 5th, 2010 · No Comments
1994-Newer Dodge Ram Truck FP-RAM Base Installation Instructions
January 12th, 2010 · No Comments
The FP-RAM (1994-Newer Dodge Ram Truck base) is a no-holes base. The base consists of two main components: a base with an extension plate and a pole assembly. Installing a no-holes base does not require drilling any holes into the vehicle.
Attaching the extension plate:
1. Attach the extension plate to the bottom side of the base, […]
2006-2007 Dodge Charger Floor Pan & Seat S56C06 & FP56C06 Installation Instructions
January 10th, 2010 · No Comments
Removing the OEM seat
A. Begin by lifting the bottom cushion out from the rubber grommets in the floor (See fig. 6). Remove the seat belts by removing the OEM nuts from their mounting studs using a 18mm socket/wrench (See fig. 1). Do not remove the shoulder straps anchored at each side of the vehicle.
B. Remove […]
2007 Dodge Caliber Audio System Upgrade Package Installation Instructions
November 27th, 2009 · No Comments
Dodge Caliber, Jeep Compass Subwoofer Installation
1. Lift up on the B pillar post cover and then pull it towards the center of the car to remove.
2. Using a panel removal tool gently pry up the threshold/kick panel along the bottom of the front and rear door openings to release fasteners and remove panel.
3. Find the […]
Ford Ranger/Mazda B Trucks Pre Cut Kits Ready to Install
October 27th, 2009 · No Comments
Introducing a multi-stage, automotive insulation and sound damping system to give Ford Ranger trcuks the “quiet riding comfort” found in today’s new cars. AcoustiSHIELD kits are designed on current “state-of-the-art” auto acoustic technology, to insulate and control the noise, vibration and heat in the passenger cabin. Kits are pre-cut and come with easy-to-follow installation instructions […]
Wombat Assembly Manual
September 13th, 2009 · No Comments
The Wombat Kit Car is designed to fit on a stock, standard Volkswagen Classic Bug chassis. (Also fits Thing and Kharmann Ghia chassis.) The chassis does not require any modification for the kit to fit other than removal of the floor pan. It is possible to merely swap the bodies, but we highly recommend that […]