Automotive Manual, Car Parts and News

Do not attempt to manually extend or retract the mirrors. They should be moved under their motor power only!
Tools required for the installation are: 10mm deep socket, a 10mm open end wrench, trim panel remover, Philips screwdriver, razor knife, and torque inch pound wrench. For model 7005TK, a volt meter will be necessary. If you […]

[Read more →]

Ford Explorer/Mercury Mountaineer door panel removal:
1. Open door and lower window. Remove two screws at bottom of panel.
2. Remove plastic trim by pulling from the front end.
3. Dislodge window control panel by pulling up as shown.
4. Remove screw located behind trim piece and disconnect all window control plugs. Pass window control wiring panel through opening […]

[Read more →]

NOTE: If you have a lighted gearshift knob, do this first !!!
-At the base of the gear lever is a shift boot surrounding the lower shaft.
-Remove the shift boot by detaching the shift boot base from the console area, it is snapped in at the four sides.
-Locate the lighted knob wire that comes from the […]

[Read more →]