Automotive Manual, Car Parts and News

RSS Feed

Free PDF Download, Car Parts and Automotive News

Flyin’ Miata Fuel Rail Installation Instructions

August 18th, 2010 · No Comments

Congratulations on purchasing the FM Fuel Rail! We’re confident that this high quality piece will help ensure the safety and performance of the engine in your Miata. Following are instructions that will help you safely install this piece.
1. The fuel system first needs to have its pressure relieved. First, find the relay that’s pictured to [...]

[

97-03 5.4L Ford F-150 Aeromotive Part #14118 Installation

March 26th, 2010 · No Comments

The following steps are typical of most installations:
1. Once the engine has been allowed to cool, disconnect the negative battery cable and relieve fuel system pressure, referring to the appropriate vehicle service manual for the procedure on doing so.
2. Remove the air intake ducting from the throttle body and position it out of the way.
3. [...]

[

Ford Third Brake Light Model A Installation Guide

February 27th, 2010 · No Comments

Your third brake light kit was built to high quality standards to provide you with years of reliable service. This manual should serve as a guide for installing a third brake light kit on your vehicle. Although this guide is thorough, each installation is different, so it can not cover all applications.
You can install the [...]

[

1987-1990 Dodge Pickup 3Ф Body Lift Kit Installation Instructions

December 12th, 2009 · No Comments

1. Special literature required: OE Service Manual for model/year of vehicle. Refer to manual for proper disassembly/reassembly procedures of OE and related components.
2. Adhere to recommendations when replacement fasteners, retainers and keepers are called out in the OE manual.
3. Larger rim and tire combinations may increase leverage on suspension, steering, and related components. When [...]

[

Dodge RAM 2500 and RAM 3500 Quad Cab Long Bed Titan Fuel Tank Instructions

November 30th, 2009 · No Comments

Step Description
1. Place the vehicle on a hoist that leaves the entire underside of the frame.
2. Drain all the fuel from the original equipment tank using a pump or siphon. In some cases Dodge tanks have a screen at the tank inlet which won’t allow a siphon hose to enter. In this case, it may [...]

[

98-07 Ford Ranger/Mazda 3.0L-4.0L 2/4WD Cat-Back Extreme Dual Haust System Installation

November 4th, 2009 · No Comments

When installing this exhaust system make sure to use proper safety precautions. Use jack stands when under the truck, set parking brake, block tires and use safety glasses and gloves.
Lay out the exhaust on the floor so it looks like the drawing and compare parts with manual. To remove the stock exhaust remove it from [...]

[

1993-1995 USDM Mazda RX-7 Fuel Tank Surge Bucket Cover

November 1st, 2009 · No Comments

The third-generation Mazda RX7 (FD3S) suffers from fuel starvation issues when driven aggressively, especially on vehicles with R-compound tires. This problem is caused by particularly wide and shallow fuel tank with an off-center pump location which is offset to the driver’s side. Under hard acceleration to the left, the fuel in the tank is forced [...]

[

How to Install Your Fuel Pressure Regulator (FPR)

October 18th, 2009 · No Comments

Hose cutters, spanners, pliers, 4mm and 5mm Allen keys
Fuel rail adaptors are designed for connection of your FPR to your fuel system when your standard regulator is mounted on the fuel rail. With the standard regulator removed, install a fuel rail adaptor in place of the stock regulator and use EFI fuel [...]

[