Automotive Manual, Car Parts and News

This tool is for use on FORD 5R55W, 5R55S, and 5R55N transmissions.
1. Install the drill jig into the case by setting the jig into the servo. Retain the jig in the case with the servo’s snap-ring.
2. Drop the 9/16” guide into the jig. It doesn’t matter which one of the lands on the guide you […]

[Read more →]

1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Loosen the hose clamp and remove the air tube from the throttle body air box.
3. Disconnect the air temperature sensor connector attached to the air box.
4. Loosen the two bolts that secure the air box using a 10mm socket.
5. Remove the oil filler cap (for clearance if needed) and […]

[Read more →]

PowerAid Throttle Body Spacer Installation Instructions for 03-08 Dodge Ram 5.7L Hemi
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Loosen the hose clamp and remove the air tube from the throttle body air box.
3. Disconnect the air temperature sensor connector attached to the air box.
4. Loosen the two bolts that secure the air box using a 10mm […]

[Read more →]

These instructions outline a simple procedure of replacing the main seals and dust boots on the 1982- 83 200sx or 1986-87 Maxima rear brake calipers. Most parts are interchangeable between the two calipers, including the pads, sliders, pistons, hardware, seals, anti-squeal shims, and brake lines. The mounting brackets, and the geometry of the E-brake arms […]

[Read more →]