Follow carefully the instructions listed on these pages and use the template provided, do not over tighten bolts. Do not use silicone on any connections, use mastic. Ensure that safe work practices are followed when installing your Airflow Snorkel. Protective ear and eye wear should be worn at all times when using power tools.
2005 Nissan Pathfinder R50 Snorkel Kit S075 Instructions
November 24th, 2009 · No Comments
08-ON Ford Escape/Mazda Tribute Bull Bar Installation Instructions
November 8th, 2009 · No Comments
PROCEDURE:
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. DO NOT ATTEMPT INSTALLATION ALONE; PERSONAL INJURY OR DAMAGE TO THE TRUCK MAY RESULT.
2. From underside of vehicle, remove the passenger and driver side splash shield and the air valance.
3. Measure and mark 12 ―” from the outside and […]
98-07 Ford Ranger/Mazda 3.0L-4.0L 2/4WD Cat-Back Extreme Dual Haust System Installation
November 4th, 2009 · No Comments
When installing this exhaust system make sure to use proper safety precautions. Use jack stands when under the truck, set parking brake, block tires and use safety glasses and gloves.
Lay out the exhaust on the floor so it looks like the drawing and compare parts with manual. To remove the stock exhaust remove it from […]
Light Bar Mounting Instructions
November 2nd, 2009 · No Comments
LIGHT BAR CUTTING INSTRUCTIONS
1. Two people will be needed to complete this task.
2. Place ONLY THE MOUNTING END CASTING into the rain-gutters of your vehicle.
3. Level each Mounting End Casting so that the top flat area is parallel to the horizon.
4. Take a tape measure and measure the distance between each open end of each […]
Search engine terms: r50 snorkel, 99 pathfinder snorkel, ford escape snorkel, r50 horsepower pathfinder, nissan r50 snorkel, airflow snorkel spec, 2005 R50 pathfinder, snorkel for nissan pathfinder 2008, snorkel for nissan, nissan pathfinder r50 snorkel, 2002 pathfinder snorkel,
