Automotive Manual, Car Parts and News

1. Turn off the ignition and disconnect the negative battery cable.
2. Loosen the hose clamp at the intake resonator as shown.
NOTE: Disconnecting the negative battery cable erases pre-programmed electronic memories. Write down all memory settings before disconnecting the negative battery cable. Some radios will require an anti-theft coded to be entered after the battery is […]

[Read more →]

TO START:
1. Remove and inventory JBA exhaust
2. Disconnect negative battery cable and allow vehicle exhaust to cool.
3. With the vehicle raised and properly supported, using the 15mm socket and ratchet, loosen the clamp, at the rear of the muffler, that secures the tail pipe to the muffler.
4. Spray lubricant on the exhaust pipe behind the […]

[Read more →]

When Fred Zeder, Owen Skelton and Carl Breer developed the original engine for the 1924 Chrysler, they selected a flat-head or valve-in-block design. Chrysler engineers continued to use this conservative design until the new Hemi V-8 in the 1951 Chrysler New Yorker.
In the late 1920s and early ’30s, other auto manufactures used various combustion chamber […]

[Read more →]