Automotive Manual, Car Parts and News

Starting the Engine
(1) Inspect the installation. Reconnect the negative terminal of the battery and start the engine.
(2) Check and make sure that there no air leeks, clearance problems or irregular sound.
(3) Lightly rev up the engine couple times to check if the blow off valve is operating.

[Read more →]

Powerchip technology enhances your Mitsubishi to its ultimate level, delivering faster, smoother acceleration in all driving conditions. Whether you enjoy a leisurely weekend cruise or a hard racetrack drive – there is no easier and more effective way to release the potential from your Starion 2.0 Leaded Turbo. The following information is an overview of […]

[Read more →]

1. Unscrew the shift knob by rotating it counter-clockwise and put it in a safe place. Remove the small plastic adapter at the base of the shift knob (pictured lower left) as well. Keep this piece for re-installation later.
2. Remove the ashtray in front of the shifter.
3. Remove the small storage compartment in front of […]

[Read more →]

Installation Procedure: There are two different methods to install this grill, method #1 is easier and requires no modifications to your car, however it is not as secure as method #2. The second method is more stable and less prone to move but requires drilling several holes in the plastic on your car and is […]

[Read more →]

Installation of this baseplate requires removing the bumper fascia. Holes need to be drilled in the frame and
metal bumper. The air dam needs to be trimmed.
1. Starting in the front fender wells, remove the three Phillip head plastic rivets that are directly in front of the tires. Also remove the 10mm Hex head bolt inboard […]

[Read more →]

This Service Manual Supplement has been prepared with the latest service information available at the time of publication. It is subdivided into various service groups that are unique to the retractable hardtop. Each section may contain one or more of the following: diagnosis, disassembly, repair, installation procedures, specifications, and tightening references. Service groups that are […]

[Read more →]

KCA357 camber kit is designed to reduce negative camber only on the rear of the vehicle using a shim type adjustment system. It is beneficial on most standard cars and is critical on any lowered application due to the large amount of base negative camber and lack of any standard adjustment available. Excessive negative camber […]

[Read more →]