Automotive Manual, Car Parts and News

20W-D tailBlazer application
Replaces Dual-contact bulb types:
GE #1157 (12V 32/3cp)
G-4 Halogen element is 20W (14.5 v) rated
320 Lumen output. Average life is 2000 hrs
Modulates the Brake bulb for a 4-sec Deceleration Warning
MATCHED SET for dual bulb tail lights – 20W-D 2PAK
‘Z’ Option for newer CAN-bus BMWs – 20W-DZ

[Read more →]

I’ll admit to a dirty little secret: I’ve always loved K bikes. I have owned just about every variation of them over the years, but my favorite has always been the standard K100. It has a certain appealing industrial look to it that I’ve always liked, and K bikes have proven to be practically bulletproof […]

[Read more →]

The B&M CommandFlo Fuel Flow Modifier has been designed to work on all 1988 thru 2000 Honda Civics/ CRX’s and 1990 thru 2000 Acura Integras/NSX’s, except those models with TBI (Throttle Body Injection). The B&M CommandFlo Fuel Flow Modifier allows the user to accurately adjust fuel flow (and hence fuel pressure) in response to engine […]

[Read more →]

REMOVAL & INSTALLATION Front Turn Signal and Parking Lights CRV MODELS AND V6 ODYSSEY MODELS
1. Turn the steering wheel in the opposite direction from which the bulb is to be removed.
2. Using a flat blade screwdriver, remove the fasteners securing the inner fender behind the headlight and pull back on the
inner fender liner.
3. Remove the […]

[Read more →]

The Transmission Control Module (TCM) is not a part of the Engine Control Module
(ECM), but will flash the “HOLD” light and send a “Mil Request Signal” to the ECM when
the TCM has stored a DTC.

[Read more →]

The adapter is provided for connection of an iPod (with a Dock connector) to a genuine Mazda audio system. The iPod can be operated from a genuine Mazda audio system in the same way as an externally connected CD changer.
iPod models (software) which can be connected and used with the audio system are as follows:
• […]

[Read more →]

The recommended push beam height for this undercarriage assembly is 12-1/2″ from the center of the push beam to level ground. DO NOT exceed 14-1/2″ in height for this undercarriage.
WARNING: Always perform vehicle undercarriage installations with the keys removed from the vehicle’s ignition. Properly tag the ignition switch to alert others work is being performed […]

[Read more →]

The mounting procedure outlined below covers 1994 & newer 4 X 4 DODGE ū and 1 ton and 1994 - 1996 4 X 4 DODGE ― ton trucks. You will need to refer to the illustrations and familiarize yourself with each of the undercarriage components and their relative position to each other. Then proceed as […]

[Read more →]

- Remove the clamp (1) securing the crossover tube to the AFM
- Remove the clamp (2) securing the air snorkel to the air box.
- Unplug the AFM connector (3) by pushing down on the tab and pulling away. Do not pull on the wires.
- Remove the two 12 mm bolts (4 & 5) securing the […]

[Read more →]

This B&M Short Throw Shifterhas been designed to work on most 1992 - 2001 Ford Escort/ZX2, 1992-1999 Mazda MX-3/30X, 1992-1994 Mazda 323, and 1992-2002 Mazda Protegé/MP3/5 models. It has been engineered to greatly reduce shift throw and improve shifter feel. Check the parts and tools lists at the beginning of these instructions for the supplied […]

[Read more →]