Automotive Manual, Car Parts and News

TO START:
1. Remove and inventory JBA exhaust
2. Disconnect negative battery cable and allow vehicle exhaust to cool.
3. With the vehicle raised and properly supported, use a 15mm socket to remove the bolts that attach the exhaust system to the Catalytic converter.
4. Using a pry bar or a pair of channel lock pliers, remove hangers from […]

[Read more →]

TO START:
1. Remove and inventory JBA exhaust.
2. Disconnect negative battery cable and allow vehicle exhaust to cool.
3. With the vehicle raised and properly supported, spray lubricant on all rubber isolators. Using the pry bar, remove rubber isolators from muffler hangers.
4. Remove the factory exhaust clamp located directly behind the catalytic converter.
5. Remove the tail pipe […]

[Read more →]

TO START:
1. Remove and inventory JBA exhaust
2. Disconnect negative battery cable and allow vehicle exhaust to cool.
3. With the vehicle raised and properly supported, using the 15mm socket and ratchet, loosen the clamp, at the rear of the muffler, that secures the tail pipe to the muffler.
4. Spray lubricant on the exhaust pipe behind the […]

[Read more →]

Read all instructions before starting any work.
1. Remove the O.E. muffler and tail pipe assembly.
2. Connect the intermediate pipe (53218) to the catalytic converter and clamp in place.
3. Install muffler. Clamp but do not tighten yet.
4. To install the tail pipe hangers (35103), locate a rectangular hole in the frame 3″ behind the O.E. tail […]

[Read more →]