I have a 1996 Cadillac Eldorado, key seems to be stuck in ignition. Key will turn to start car, but will not turn to “Lock” position to remove key. Have tried turning steering wheel both ways, what next?
December 27th, 2010 · No Comments
December 17th, 2010 · No Comments
Please note: Oil cooler kits should only be installed by a highly trained professional mechanic. Serious engine damage can occur from improper installation of an oil cooler. Average installation time is approximately 3 hours.
1. Jack up the front of the vehicle and support securely on jack stands or lift. Locate the 6 push pin [...]
December 10th, 2010 · No Comments
1. Flip the rear seat bottom up. If your truck came equipped with the optional metal trays, remove each tray by removing the two large bolts using a 18mm socket and the two small nuts using a 13mm socket. Once you have removed the metal trays, replace the braces, large bolts and smaller nuts.
October 1st, 2009 · No Comments
The headlight assembly, front fascia and horn bracket are removed for baseplate installation. Drilling is required. Trimming of air dam and fascia are required. The BX8869 is available for the vehicle. Attachment Tabs are 23 inches center to center and a height of 12 inches.
1. Using the 10MM socket, remove the five metric bolts from [...]