Dodge Nitro Subwoofer Installation
1. Find the fuse block under the hood and open the fuse box cover.
2. Using a 13mm socket and ratchet loosen and remove the fuse box power supply nut. Fig. 1
3. Connect the ring terminal of the power harness to the fuse box power lug and retighten the nut.
4. Route the wire […]
2007 Dodge Nitro Audio System Upgrade Package Installation Instructions
December 12th, 2009 · No Comments
94-01 Dodge Ram 1500 Models: 7005 & 7005TK With Manual Stock Mirrors Instructions
November 26th, 2009 · No Comments
Do not attempt to manually extend or retract the mirrors. They should be moved under their motor power only!
Tools required for the installation are: 10mm deep socket, a 10mm open end wrench, trim panel remover, Philips screwdriver, razor knife, and torque inch pound wrench. For model 7005TK, a volt meter will be necessary. If you […]
Search engine terms: fuse paneel on dodge 06 3500 cummines, how to remove stereo 07 dodge nitro, remove dodge nitro stereo, where is the best place to go through the fire wall in a 2007 dodge ram, , , 08 Dodge Nitro Alarm Wiring Diagram, 2008 dodge nitro door disassembly, dodge neon front door speaker factory harness positive negative, remove fuse box caliber, 2008 dodge ram stereo diagram, 2008 dodge nitro accessory outlet fuse, , how to remove door panel of dodge nitro, 2003 dodge sub box, harness pin remover, 15 yellow subwoofer box, 2008 f150 stereo systems upgrades, , radio wiring diagram 2007 dodge nitro,
