Automotive Manual, Car Parts and News

RSS Feed

Free PDF Download, Car Parts and Automotive News


2001 Ford F150 Crew Cab Installation Instructions

January 18th, 2010 · No Comments

As you read through this procedure, note that each part referenced has the same callout number throughout. Also, the part number in the text matches the corre- sponding part number in the art. Kit parts are prefaced by the word kit in italics.
NOTE
You will find it easier to keep track of hardware if immediately after […]

[Read more →]


2003-Up Dodge 2-bag Rear System Install Instructions

December 20th, 2009 · No Comments

Before installation of the Air Ride unit, prepare a smooth, flat, hard surface and have all tools and equipment needed for the job. Chock the front wheels of the truck, to prevent it from rolling forward or rearward. Place a jack on each side of frame ahead of the rear springs, front bolts.

[Read more →]


2000 Dodge Dakoda Installation Instructions

November 28th, 2009 · No Comments

Get ready to install the kit.
1. Remove the shift transfer case shift linkage.
a. If present on your vehicle, remove four bolts and skid plate from the frame under the transmission and transfer case.
b. Remove two rubber bushings and transfer case shift linkage from shift lever and transfer case.
2. Remove the front bumper.
a. Remove nine panel […]

[Read more →]


Mazda 3 Smoked Rear Reflector with LEDs Installation Instructions

October 21st, 2009 · No Comments

This installation guide specifically focuses on the hatchback version of the vehicle. Installation on the sedan will be similar.
Tools required:
• Socket wrench with 10mm socket and 8-inch extension
• Philips-head screwdriver
• Flat-head screwdriver
• Supplies for tapping into four (4) to eight (8) 22mm wires (depending on desired operation)

[Read more →]


Vehicle-to-Trailer Wiring Systems

September 26th, 2009 · No Comments

How It Works:
Most pickups have a molded connector that joins the wiring harness on the truck bed to the main wiring harness of the frame. This connec­tor is lo cat ed just be hind the rear bumper.
1) simply pull apart this connector
2) insert the “T” connector
3) plug it back together
4) Now plug in the harness […]

[Read more →]


500 Abarth Technical Spec

July 23rd, 2009 · No Comments

Faithful to the saying coined for Abarth cars in the 1960s (‘small but wicked’), the 500 Abarth promises to be a ‘small’ car with exceptional performance. It is powered by a 1.4 16v Turbo petrol engine which delivers a maximum of 135 bhp at 5000 rpm and peak torque of 206 Nm at 3000 rpm […]

[Read more →]