Automotive Manual, Car Parts and News

Step 1: From inside Gulfbox, insert Valve inlet piece and outlet piece through holes provided in each end. Attach lock nuts for these two pieces on threads extending through holes in body of Gulfbox, and tighten snugly.
Step 2: Place rubber gaskets provided in saddles of both inlet and outlet pieces.
Step 3: Attach the Expansion Connection […]

[Read more →]

1. Disconnect the negative battery cable, and remove the factory “accordion” style intake hose by loosening the two factory clamps.
2. Loosen the two 10mm bolts securing the factory air box to the intake manifold.
3. Disconnect the air temperature sensor wire on the front of the factory air box & twist to remove the sensor from […]

[Read more →]

Getting started
- Chock the other 3 wheels on both sides
- Release handbrake
- Put the gearbox into neutral
- Loosen wheel nuts
- Jack up the car
- Remove wheel nuts + wheel
- Place jack-stand under car for safety

[Read more →]

Removing the old top
Remove the rear carpet. Use the trim removal tool to remove all the carpet fasteners. These push type retainers are fragile. Try not to pry them out by putting all the pressure on the head of the stud.
Remove the frame stops from each side of the car and remove the carpet from […]

[Read more →]