Automotive Manual, Car Parts and News

FLARE INSTALLATION PROCEDURES
Step 1: Painting (Optional)
(A) It is recommended that painting be done prior to installation.
(B) Sand (optional) before application of paint.
(C) Clean outer surface with a high-grade degreaser. DO NOT USE
LACQUER THINNER OR ENAMEL REDUCER AS A DEGREASER. Wipe outer surface thoroughly with a tack rag prior to painting.
(D) Paint flares using a high […]

[Read more →]

Getting started
- Chock the other 3 wheels on both sides
- Release handbrake
- Put the gearbox into neutral
- Loosen wheel nuts
- Jack up the car
- Remove wheel nuts + wheel
- Place jack-stand under car for safety

[Read more →]

INSTALL GAUGE COMPONENTS BY USING INSTRUCTIONS THAT WERE SUPPLIED WITH THE GAUGE.
1. Begin by removing the A pillar trim by locating upper seam and prying outward. (Do not use tool to pry) With A pillar pulled out, lift upwards and remove completely.
2. With your stock A pillar now removed you will need to drill a […]

[Read more →]

Installation of this baseplate requires removing the bumper fascia. Holes need to be drilled in the frame and
metal bumper. The air dam needs to be trimmed.
1. Starting in the front fender wells, remove the three Phillip head plastic rivets that are directly in front of the tires. Also remove the 10mm Hex head bolt inboard […]

[Read more →]