To install the 6-speed, a new cross-member must be fabricated. The transmission mount has to be moved to the rear 3.75”, and since the motor and transmission angle down, the mount will have to be .56” lower.
January 14th, 2011 · No Comments
May 22nd, 2010 · No Comments
Vehicles equipped with 4WD and C205F front axle assembly use equal length axle shaft system to deliver power from front differential to front wheels. Both axle shafts are identical and interchangeable, 3-piece units consisting of outer Rzeppa joint, solid interconnecting shaft and inner tripod joint. Both Rzeppa joints and tripod joints are true Constant Velocity [...]
May 20th, 2010 · No Comments
Axle shafts transfer power from transaxle to drive wheels. Axle shafts consist of a shaft and flexible Constant
Velocity (CV) joint at each end. See Fig. 1 . Inner CV joint is splined to transaxle. Outer CV joint is splined to
hub assembly and secured by wheel bearing lock nut.
Inner CV joint is a plunging tripod joint. [...]