Automotive Manual, Car Parts and News

Instructions Procedure:
• Lift vehicle and remove wheels.
• Remove nut (1) and bolt (2)
• Remove lower absorber mounting bolt (3).
• lower wishbone (4) by prying downward.
• Remove inside paneling in the trunk.
• Remove nuts (5 and 6).
• Remove complete shock assembly by pulling downward.
• Disassemble shock assembly using spring compress or. when disassembling ref er to […]

[Read more →]

Installation
1. Place the coach on a level concrete surface. Measure each side of the coach from the front wheel well to the ground. Record these measurements as you will need them in Step 9.
2. Place a jack under each side of the frame just behind the leaf spring shackles. Jack the coach up high enough […]

[Read more →]

1. To begin installation, block rear wheels and apply parking brake so that the vehicle is stable and cannot roll forward or back. Lift front of the vehicle on appropriate lift points, such as the frame, and support the frame with jack stands on both passenger and driver sides. Remove front wheels.
2. Position a floor […]

[Read more →]

All efforts were made in designing this kit to ensure easy and secure installation and long life. However it is intended for installation by those comfortable with working on their cars suspension and is also intended for racing/off-road use. No warranty is expressed or implied. Working on your car is inherently hazardous so be sure […]

[Read more →]