Automotive Manual, Car Parts and News

FRONT OF VEHICLE
1. Park vehicle on level concrete surface.
2. Center and lock the steering wheel.
3. Block the rear wheels of the vehicle to prevent vehicle from moving in either direction.
4. Remove the upper track bar bolt using an 18mm socket and save bolt for later reinstall. See Figure A.
5. Remove the lower front shock bolts […]

[Read more →]

FRONT OF VEHICLE
1. Park vehicle on level concrete surface.
2. Center and lock the steering wheel.
3. Block the rear wheels of the vehicle to prevent vehicle from moving in either direction.
4. Remove the upper track bar bolt using an 18mm socket and save bolt for later reinstall. See Figure A.
5. Remove the lower front shock bolts […]

[Read more →]

Step 1: Position truck on a flat surface and lift vehicle by the frame so that the front wheels are off the ground using a floor jack and jack stands or a (2) two post lift if available and remove the front wheels and tires. Locate the front sway bar and unbolt the lower end […]

[Read more →]

Prior to installation, carefully inspect the vehicle’s steering and drive train components. Be sure to check ball joints, tie rod ends, pan-rod bar, and control arm bushings. Everything must be tight and in good working condition.
• We recommend installation be done by a trained professional
• Read instructions carefully before attempting installation
• Secure and properly block […]

[Read more →]