Automotive Manual, Car Parts and News

Read all instructions before starting any work.
1. Remove the O.E. inlet pipe/muffler/tail pipe welded assembly from the vehicle. Lubricate the rubber isolators with WD-40, or a similar product, to aid in removal of the metal rod hangers. Do NOT remove the exhaust pipe just ahead of the welded muffler assembly
2. Install DynoMax inlet pipe […]

[Read more →]

Prior to installation, carefully inspect the vehicle’s steering and drive train components. Be sure to check ball joints, tie rod ends, pan-rod bar, and control arm bushings. Everything must be tight and in good working condition.
• We recommend installation be done by a trained professional
• Read instructions carefully before attempting installation
• Secure and properly block […]

[Read more →]

For easier assembly and installation, vehicle and all snowplow components should be on a smooth, level, hard surface, such as concrete.
1. Remove the bumper and retain the fasteners. If there is a plastic attachment below the radiator, remove it and retain those fasteners as well.
2. Hold the front mount so the holes on the mount’s […]

[Read more →]